Eject Water From Your Phone Speakers Instantly

Yes, our technology works by using a precisely calibrated 165Hz frequency that resonates with your speaker components, gently ejecting water from the speaker grilles. It has been tested on thousands of devices with high success rates. For best results, use it immediately after water exposure.

We use 165Hz because this frequency is in the sweet spot for iPhone speaker resonance. At this frequency, the speaker cone vibrates at a rate that effectively displaces water without causing internal stress or damage. This frequency has been tested extensively across iPhone models dating back to iPhone 12.

Absolutely. The app produces sound at a controlled frequency and volume that is safe for all iPhone internal components. The vibrations are gentle and precisely calibrated. Millions of iPhones have built-in speaker systems designed to handle these frequencies during normal use. Our app simply applies this in a targeted way.

Most water ejection happens in 5-15 seconds. You may need to run it a few times depending on how much water is in your speaker. The app works best when used immediately after water exposure. For heavily water-logged speakers, repeat the process 2-3 times with 30-second breaks in between.

The current version of Eject Water is optimized for iPhone speakers. For AirPods, Apple recommends letting them air dry completely before use. We're exploring AirPods compatibility for future updates.

No. The app uses a controlled frequency specifically tuned for speaker ejection, not audio output through headphones. The volume is safe, and the frequency is not in the range that causes hearing damage. We recommend placing your phone on a surface during use rather than holding it to your ear.

Retrieve your phone immediately and power it off. Do not charge it or plug anything in. Gently shake excess water out with the speaker facing down, then use the Eject Water app to push remaining water from the speakers. For a complete recovery guide, see our step-by-step rescue guide.

No. Apple officially advises against putting your iPhone in rice. Rice grains can get stuck in ports and speaker grilles, and starch residue can cause additional damage. Instead, air dry your phone in a well-ventilated area and use a water eject app to clear speakers. Learn more in our Water Eject vs Rice comparison.

Muffled sound is the most common symptom of water trapped in your speaker. Run the Eject Water app 2-3 times with 30-second breaks between each cycle. Place your phone speaker-side down on a paper towel between cycles. If the sound is still muffled after multiple attempts, let your phone air dry for 24 hours and try again. See our emergency guide for detailed instructions.

Yes. The 165Hz frequency works on all iPhone models with built-in speakers, including iPhone 16 Pro Max, iPhone 16, iPhone 15 series, iPhone 14, iPhone 13, iPhone SE, and older. The speaker resonance characteristics are similar across all models. Check our complete iPhone guide for model-specific tips.

Yes, Eject Water – Fix My Speakers is free to download from the App Store. No subscription, no hidden fees. Simply download, open, and tap to start ejecting water from your speakers instantly.

Apple Watch has a built-in Water Lock feature that uses speaker vibrations to eject water. Our app brings the same acoustic principle to iPhone speakers, which don't have a built-in water eject function. We use a scientifically optimized 165Hz tone – similar to how Apple Watch expels water – specifically calibrated for iPhone speaker dimensions.

No – Apple and repair experts strongly advise against using a hair dryer. The heat can warp internal components, damage the battery, and melt adhesives that seal your phone. Use room-temperature air drying combined with our water eject app for the safest and most effective speaker recovery.